Storage; Transport - Cub Cadet H21 Notice D'instructions Originale

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
Release the locknuts 1 .
Î
To set the level, turn the adjusting nuts 2 .
Î
Re-tighten the lock nut. (Tightening torque
Î
= 34–40 Nm)

Storage

Attention!
Damage to appliance materials
¾ Store the device in a clean, dry enclosed space.
¾ Protect the device from rust when storing it for
lengthy periods of time.
¾ Protect the device from frost.
Clean the device and the grass catcher.
Î
Wipe all metal parts down with an oily cloth or
Î
spray them with oil to protect them from rust.
Charge the battery.
Î
Remove the battery in the event of long-term
Î
storage (e.g. over winter).
Charge up the battery every 6–8 weeks in the
Î
event of long-term storage and before reinstalling.
Drain the fuel and shut down the engine – see the
Î
engine manual.

Transport

Note
The device is not approved for public thor-
oughfares in accordance with national road
legislation (StVO).
Short distances
Drive the lawn tractor only short distances to
Î
change its location of use.
24
Long distances
Danger posed by unstable and unsecured
ramps
ÂRisk of serious injury to people and sever
damage to property
¾ If you are transporting the device on a
trailer or in a lorry, first make sure that
the ramp is stable and secure.
Danger posed by inadequate fastening
ÂTurbulence during transport
¾ If you are transporting the device in a
trailer or lorry, ensure it is adequately
fastened and secured.
Transport the device on a transport vehicle over
Î
long distances.
Manually push the device in neutral into/onto the
Î
transport vehicle.
Activate the parking brake and secure the device
Î
against slipping.
WARNING!
WARNING!
Storage

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

769-11722f

Table des Matières