Intended Use; Identification Plate; Safety Equipment - Cub Cadet H21 Notice D'instructions Originale

Intended use

Intended use
This device is designed to be used
- as a lawn tractor for mowing lawns in the house
garden and leisure garden,
- with accessories explicitly approved for this lawn
tractor.
- in accordance with the descriptions and safety
information given in this instruction manual
Any other use is classed as an unintended use.
Improper use is not covered by the warranty and the
manufacturer will reject any liability. The user is liable
for injuries to third parties and damage to their property.
Unauthorised changes to the device exclude liability
of the manufacturer for any resulting damage and/
or injury.
This device is not licensed for use on public roads or
for transporting people.

Identification plate

Position
The identification plate is located under / in front of
the driver's seat.
Note
The marking is considered as a document. It
must never be altered or obliterated.
MODEL NUMBER
1
XXXXXXXXXXX
2
XXXXXXXXX
3
XXX KG
4
XXX
10
Layout
1 Model number
2 Model name
3 Weight
4 CE mark
5 Manufacturer
6 Device group
7 Power / engine speed (rpm)
8 Serial number
9 Year of construction
10 Guaranteed sound level
9
DOM SERIAL NUMBER
XX/XXXX XXXXXXXXXXX
XX,X KW XXXX/MIN
XXXXXXXX
MTD PRODUCTS AG
INDUSTRIESTR. 23
D 66129 Saarbrücken

Safety equipment

Deflector flap S
Contact with the cutting blade and items
flung out
ÂRisk of injury
¾ Only operate the device with the
deflector flap attached.
Safety locking system
The safety locking system will only allow the engine
to start when
- The driver is sitting on the seat.
- the brake pedal has been depressed or the park-
ing brake is in the park position.
- The accelerator pedal is at "N".
- the cutter deck has been switched off; i.e.: PTO
switch or PTO lever is in the position "O/Aus/Off")
(PTO = Power Take Off).
For devices with a PTO switch
(electromechanical PTO), the safety locking
system automatically switches off the cutter deck
once the operator leaves the seat with the cutter
deck activated; irrespective of whether the parking
brake was activated beforehand.
For devices with a PTO lever (mechanical PTO),
the safety locking system automatically switches off
the engine once the operator leaves the seat with
8
7 the cutter deck activated; irrespective of whether the
6
parking brake was activated beforehand.
For devices without an OCR function or with
a deactivated OCR function, the safety locking
5
system prevents reversing with the cutter deck
activated (automatic shutdown of engine or cutting
mechanism).
Prior to reversing on devices with a PTO, switch
Î
off the cutter deck using the PTO switch or the
PTO lever, depending on the design.
Information about devices with a PTO
switch
In the case of automatic shutdown through
the safety locking system (e.g. reversing or
leaving the seat with the cutter deck activat-
ed), first switch the switch off, and then back
on again, to release the clutch lock (PTO).
CAUTION!
EN
13