Preventing Tones From Changing During Performance (Lock Function); Playing Along With A Portable Audio Player; Playing Along With An Audio File From Usb Memory - Roland Lucina AX-09 Mode D'emploi

Display Value
C71
CC71 (RESONANCE)
CC72
C72
(RELEASE TIME)
CC73
C73
(ATTACK TIME)
C74
CC74 (CUTOFF)
AFt
AFTERTOUCH
PUP
PEDAL UP
PDn
PEDAL DOWN
MEMO
With the factory settings, the foot pedal is assigned to
C64
(Hold).
If using a foot pedal not made by Roland
If you're using a foot pedal that was made by a
manufacturer other than Roland, the pedal polarity might
be reversed, so that the operations that occur when you
press and release the pedal are the opposite of what you
expect. If so, hold down the [SHIFT] button and press the
[V-LINK] button three times to make the display indicate
" . " Then use the [INC/+] / [DEC/–] (OCTAVE [+] / [–])
PoL
buttons to make the display indicate "
To save this setting, hold down the [SHIFT] button and
press the [WRITE] button.
Value
Std
.(STANDARD)
rEu
.(REVERSE)
Preventing Tones from Changing
During Performance (Lock function)
You can lock the tone selected on the Lucina AX-09 to
prevent a different sound from being selected even if you
accidentally press a tone button while performing.
1. Hold.down.the.[LOCK].button.until.it.lights .
The Lock function will turn on; in this state, button
operations will not switch the tone.
To re-enable tone switching, hold down the button once
again until [LOCK] button goes out.
14
Explanation
Control the resonance. Increasing
the resonance value will produce
a distinctive tonal character that is
typical of a synthesizer.
Control the time from note-off (when
the key is released) until the sound is
no longer heard (i.e., the release time).
Control the sharpness (attack speed)
with which the sound begins.
Control the cutoff. Higher values will
make the sound harder (brighter);
lower values will make the sound
softer (more mellow).
Apply the most suitable effect for each
of the Lucina AX-09's tones.
Select the tone of the next tone
number.
Select the tone of the preceding tone
number.
. "
rEu
Explanation
Pedals made by Roland
Pedals with a polarity opposite to that
of Roland pedals
Playing Along with a Portable
Audio Player
You can connect your portable audio player, and play the
Lucina AX-09 along with your favorite songs.
1. Connect.your.portable.audio.player.to.the.Lucina.
AX-09's.EXT.IN.jack .
Use a stereo mini-plug
(1/8") cable to connect
your player to the EXT
IN jack.
2. Play.back.a.song.on.your.portable.audio.player,.
and.play.along.on.the.Lucina.AX-09 .
Use the controls of your player to adjust the volume and
select songs.
* When.connection.cables.with.resistors.are.used,.the.
volume.level.of.equipment.connected.to.the.inputs.(EXT.
IN).may.be.low ..If.this.happens,.use.connection.cables.
that.do.not.contain.resistors .
Playing Along with an Audio
File from USB Memory
The Lucina AX-09 can play back audio
files (MP3, WAV, AIFF) that you've copied
to USB memory from your computer,
allowing you to play along with your
favorite songs.
Copying audio files from your
computer to USB memory
You'll need to copy the audio files from your computer to
the root level of your USB memory.
Copy.to.a.USB.drive
MP3, WAV, AIFF