Using A Foot Pedal - Roland Lucina AX-09 Mode D'emploi

Display Value
C66
CC66 (SOSTENUTO)
C71
CC71 (RESONANCE)
C72
CC72 (RELEASE TIME)
C73
CC73 (ATTACK TIME)
C74
CC74 (CUTOFF)
AFTERTOUCH
AFt
(Default)
Adb
ADLIB
SLo
SOLO SYNTH
MEMO
By holding down the [INC/+] / [DEC/–] button you can
choose this setting rapidly. To choose even faster, hold
down the button and press the other button as well.
3. Release.the.[SHIFT].button .
4. To.save.this.setting,.hold.down.the.[SHIFT].button.
and.press.the.[WRITE].button .
Explanation
Sustain the notes that are currently
being held down.
Control the resonance. Increasing
the resonance value will produce
a distinctive tonal character that is
typical of a synthesizer.
Control the time from note-off (when
the key is released) until the sound
is no longer heard (i.e., the release
time).
Control the sharpness (attack speed)
with which the sound begins.
Control the cutoff. Higher values will
make the sound harder (brighter);
lower values will make the sound
softer (more mellow).
Apply the most suitable effect for
each of the Lucina AX-09's tones.
By fingering a chord and moving
your hand above the D Beam
controller, you can produce an
arpeggio of that chord.
The distance from the D Beam
controller will determine the octave
span of the chord that is played, and
the speed at which you move your
hand up and down will determine
the speed at which the chord is
arpeggiated.
For example if you use your right
hand to hold down the four notes
"C D E G" and move your left hand
above the D Beam controller, a
phrase such as "C D E G C D E G C D E
G... " will play.
The Lucina AX-09 will operate as a
monophonic synthesizer whose pitch
can be controlled by moving your
hand above the D Beam controller.

Using a Foot Pedal

If you connect a pedal switch (DP series; sold separately)
to the FOOT PEDAL jack, you can hold down the pedal to
make notes continue sustaining even after you release the
keyboard.
Alternatively, you can use the pedal to apply numerous
other effects.
Connecting a foot pedal
MEMO
Alternatively, you can connect an expression pedal
(EV-5) instead of a pedal switch (DP series).
NOTE
Use only the specified expression pedal (EV-5; sold
separately). By connecting any other expression pedals,
you risk causing malfunction and/or damage to the
unit.
Specifying the foot pedal assignment
Hold down the [SHIFT] button and press the [V-LINK]
button twice; the screen will indicate "
to assign the effect applied by the foot pedal.
You can assign the following functions to the pedal.
To save this setting, hold down the [SHIFT] button and
press the [WRITE] button.
Display Value
C 01
CC01 (MODULATION)
C 05
CC05 (PORTA TIME)
C 07
CC07 (VOLUME)
C 10
CC10 (PAN)
C 11
CC11 (EXPRESSION)
C 64
CC64 (HOLD)
C 65
CC65 (PORTAMENTO)
C 66
CC66 (SOSTENUTO)
, " allowing you
P DL
Explanation
Apply vibrato.
Control the portamento time over
which the pitch changes between
notes when playing with portamento.
Control the volume.
Control the panning.
Control the expression.
Sustain the notes.
Smoothly connect the pitch from one
note to the next.
Sustain the notes that are currently
being held down.
13