Clipping On The Housing Strips (Igloo Ii ); Installation Of The Motor - Procopi Delta STARDECK Notice D'installation Et De Maintenance

8
CLIPPING ON THE HOUSING SLATS
9
MOUNTING THE MOTOR
A
Fixing the aluminium bracket in position
C
Electrical cables
Caution: Ensure that the pins is correctly positioned
Fitting the motor onto the motor bearing
On IGLOO II housings, lthe motor should be positioned upside down (head down).
Start with the housing slats on the pool side
B
Mounting the junction box
D
Inserting the U-shaped pin
73/76
2009/02 - Indice de révision : D - code : 0035431