b
Mount the finishing trim on the partition using aluminium rivets.
c
Slide the trapezoidal section onto the straight section.
d
a) Place the partition flat on the ground, pool side down (smooth side).
b) Next position the plats*** such that they lie across the straight section and the trapezoidal section and they divide the
partition into roughly equal areas.
c) Adjust the height of the plats*** to ensure that no hole coincides with a groove or join.
d) Using the holes as a template, drill hole in the partition and rivet the plats*** in position.
63/76
2009/02 - Indice de révision : D - code : 0035431