Fasteners - Procopi Delta STARDECK Notice D'installation Et De Maintenance

MOUNTING THE SLAT COVER SAFETY FASTENERS
Mounted on the wall
4 1
5
The fastening straps (8) are pre-mounted on the first two slats of the cover.
Before proceeding, check that no two straps are more than 340 cm apart.
Using the nylon S8 bushings (5) and the Phillips pan head screws, 5.5 x 50 (2), mount the fastener frames on
the wall opposite the axle (drill holes Ø8 mm - depth 60 mm), exactly opposite the fastening straps. Position the
fastener frames such that the water level markers 'N' are at the water level.
In pools waterproofed with liners or similar, do not forget to insert the gasket (4) between the fastener frame
and the waterproofing.
3
2
6
7
Index Nbr Component designation
1 1 Fastener frame
2 4 Phillips pan head screws ST 5.5 x 50
3 4 Washer Z6
4 1 Fastener frame gasket
5 4 Nylon bushing S8
6 1 Stainless steel slide rod
7 1 Trim
8 x Fastening strap
N
55
30
Water level markers "N"
44/76
2009/02 - Indice de révision : D - code : 0035431
Strap with ring
8