Assembly Instructions - SPORTSTECH IT200 Mode D'emploi

11
18
19
23
3
STEP 2
1. Install the support tube for the backrest (4) on
the Z swivel joints (11) of the main frame. Use
2 washers (23), 1 screw (21) and 1 nut (26)
for each hole.
2. Mount the headrest (14) at the upper end of
the back support tube (4) with 2 screws (22).

3. ASSEMBLY INSTRUCTIONS

Firmly tighten all component parts
and pre-assembled parts!
11
18
1
2
23
19
25
STEP 1
1. Open the front and rear main frame (1, 2) into
a stand and insert the locking pin (18).
2. Install the boundary bar (3) on the front main
frame (1) with the washers (23) and the
screws (19).
11
21
23
26
23
11
21
14
22
22
4
13