Assembly Instructions - SPORTSTECH BRT300 Mode D'emploi

ASSEMBLY INSTRUCTIONS

Attach the right support (3 #) to the stabilizer (1 #), align the holes carefully and
STEP 1:
secure with two M10 * 65 carriage screws (21 #), one bracket (10 #), two phi
discs (26 #) and two M10 aircraft nuts (28 #).
Insert the slip-on frame (9 #) into the holes of the stabilizer (1 #) and secu-
re them with two phi washers (26 #) and two allen screws M8 * 20 (23 #).
Repeat this in the same manner to install another one.
Note: The four feet have already been preassembled.
EN
Firmly tighten all component parts
and pre-assembled parts!
27