Assembly Instructions - SPORTSTECH KS600 Manuel

ASSEMBLY INSTRUCTIONS

i
Prior to installation, please check of which material
your desired installation location is made and whether
it is resilient.
Note: Complete step 1-4 before going back and tightening nuts with spanner (provided)
Step 1: Use the two smaller bolts (#12), two nuts (#13) to attach the plastic support to two bars as
shown.
Step 2: Use the straight bar with 2 holes (there is also a straight bar with 6 holes). Place the bar in
the right place as shown and fix it with one screw (# 10), one nut (# 11) and one washer (#22) on
each side.
22