SPORTSTECH IT200 Mode D'emploi page 23

i
Do not alter the product in any way and use only original replacement parts. Have all
repairs carried out in a professional workshop or from similary qualified persons. Im-
proper repairs can lead to serious risks for the user. Use the product for the intended
purposes as described in this user manual only.
Shield the invertion table from spraying water, moisture, high temperatures and direct
sunlight.
INFORMATION ON ASSEMBLY
• Assembly of this product must be carried out carefully by an adult person. Ask for the assistance
of an other person with technical insight in case of doubt.
• Before beginning assembly of the product, read all assembly steps carefully and review the dia-
gram.
• Remove all packaging materials and place all individual components on a free surface. Shield the
assembly surface from filith and scratching by laying down suitable padding.
• Check the components against the components list to make sure all are present. Do not dispose
of the packaging materials until assembly is complete.
• After assembling the product according to the instructions, make sure that all screws, bolts and nuts
are installed correctly and tightened.
• Place and use the device on a dry, even and non-slip surface with at least 0,5 meters space
around it.
• The device is intended exclusively for home use and not for commercial purposes.
• Never place the unit on a surface if it blocks the ventilation openings.
• To protect the floor or carpet from damage or discoloration, place a special floor mat under the
unit.
• It is recommended to assemble the device with two people present.
23