Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STEP 1:
STEP 2:
Attach grab bar (11) to the vertical support (5) and fix them with M10x40 (8) screws + flat washers
(every screw with a flat washer). Fix the screw in the top and buttom by hand, then tighted by wrench.
Do not fasten one screw individully and then install the other one. Otherwise it cannot install.
ASSEMBLY INSTRUCTIONS
Attach vertical support (5) to support frame (29)
with M10x75 screws, arc washers (both side) and
M10 nuts.
25
Attach the ellbow pad with
M6X65 (7) screws.
Publicité
Chapitres
Table des Matières
