SPORTSTECH IT200 Mode D'emploi page 27

15
5
STEP 6
1. Mount the Left Armrest (9) on to the
Rear Bracket (2) in the direction shown
in the illustration using the bolts (19),
the washers (23) and the nuts (26).
2. Attach the Right Armrest (10) to the
Rear Bracket (2) in the direction shown
in the illustration. Use the screws (19),
(20) and the washers (23) and nuts
(26).
3. The locking pin (16) is inserted into
the corresponding hole on the right
armrest (10).
4. Insert the locking pin (17) in use and
after clamping the foot into the corre-
sponding hole on the toothed disc to
secure the position.
5. Inflate the lumbar support cushion (B)
as needed.
6. Buckle up with the seat belt (A) before
each workout.
STEP 5
15
12
Insert the rail for the size adjustment (5) into the
4
rail of the backrest (17) and secure it with a lo-
18
cking pin (17) and the locking pin screw (27) on
the right side of the rail. Tighten the screw!
Attach the U-tube shoulder rest (12) to the rail of
the backrest (4) with the handle screw (18).
17
27
B
27
10
20
23
16
19
23
26
17
A
9
26
23
23
19
2
1