Assembly Instructions - SPORTSTECH VPX600 Manuel

L
1. Open the box with your new device and remove all parts. Lay the treadmill on a flat surface.
2. Loosen the locking pins on the right and left sides of the treadmill by pulling on the rotatable part
of the bolts and turning 45 °. After you have folded the handle with the console, turn the rotating
parts of the two locking pins back to the starting position until they lock in place to secure the
handle. Proceed in the same way if you want to fold the handle with the console again.
3. Connect the exerciser to a properly grounded electrical outlet and insert the safety key into the
hole provided on the console. The treadmill is now ready for use.
3. ASSEMBLY INSTRUCTION
R
28
R
L