HPI Racing reactor 500 Manuel D'installation page 5

Maximum safety
Delta-peak is a charge termination program based on voltage detection. When the battery's voltage
exceeds the threshold, the charge process will automatically stop.
Automatic charging current limit
It is possible to manually set the maximum charging current when charging your NiCd or NiMH battery
packs. When charging low impedance and capacity NiMH packs the 'AUTO' charging mode is useful.
Capacity limit
The charging capacity is always calculated as charging current multiplied by time. If the charging
capacity exceeds your chosen limit, the charge process will be terminated automatically.
Temperature threshold*
The cells internal chemical reaction while charging will cause the temperature of the cell to rise. If the
threshold is reached the charging process will be terminated.
*This function is available when connecting the temperature probe. Available as an optional part.
Input power monitoring
If a DC power supply is being used for operating the charger, the DC voltage is constantly monitored
to make sure that it does not fall below an acceptable limit. If this limit is reached the charger will stop
any processes automatically.
Data store/load
Simplify charging by storing up to 10 battery pack profiles for charging different types of car/plane
batteries, transmitter pack, receiver batteries and more.
Cyclic charging/discharging
Revive battery packs for periodic maintenance or after a long storage. The charger safely charges
the battery to full capacity then slowly discharges it to a safe level up to 5 times. Ideal if you don't use
your batteries regularly.
3
Special Features