HPI Racing reactor 500 Manuel D'installation page 30

Data Storage Program
*
NiMH CYCLE
DCGH>CHG 4.9A
DEC INC DEC
START
>3 Seconds
ENTER
SAVE...
Loading a data program
This program allows you to load a previously saved battery data program. Press the START/ENTER
key to highlight the data field and "INC" or "DEC" for more than 3 seconds to load the data.
PROGRAM SELECT
LOAD DATA
BATT START
STOP ENTER
LOAD [01] NiMH
14.4V 3000mAh
START
>3 Seconds
ENTER
Load...
In "CYCLE" mode you can set the charge/discharge sequence and the
number of cycles.
INC
Saving the data.
Choose the data save number you want to call back. Each save will have
it's data displayed on the screen.
Loading the data.
28