HPI Racing reactor 500 Manuel D'installation page 10

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Warning and Safety Notes
To avoid a short circuit between the charge leads always connect the charge cable to the charger
first, then connect the battery. Reverse the sequence when disconnecting.
Do not connect more than one battery pack to the charger at any one time.
Never attempt to charge or discharge the following types of batteries:
A battery pack that contains different types of cells (including different manufacturers)
To recharge a battery that has just been fully charged or is already fully charged.
Non rechargeable batteries (explosion hazard)
Batteries that require a different charge technique from NiCd, NiMH, LiPo or
Pb/Lead acid/Gel cell
A faulty or damaged battery
A battery fitted with an internal charge circuit or protection circuit
Batteries installed in a device or which are electrically linked to other components
Batteries that are not expressly stated by the manufacturer to be suitable for the
currents that the charger can deliver during the charge process
8

Publicité

Table des Matières
loading

Produits Connexes pour HPI Racing reactor 500

Ce manuel est également adapté pour:

101971101972101974

Table des Matières