HPI Racing reactor 500 Manuel D'installation page 33

BATTERY CHECK
HIGH VOLTAGE
BATTERY VOLTAGE
CELL LOW VOL
BATTERY VOLTAGE
CELL HIGH VOL
BATTERY VOL ERR
CELL CONNECT
TEMP OVER ERR
CONTROL FAILURE
The voltage is higher than the manual setting.
Please check the number of cells in the battery pack.
The voltage of one cell in the battery pack is too low.
Please check the voltage of each cell.
The voltage of one cell in the battery pack is too high.
Please check the voltage of each cell.
The connector is not plugged in correctly.
Please check the connector and cables.
The internal temperature is too high.
Please allow the charger to cool down before continuing.
The central processor is unable to control the feeding current.
Please check the input electricity supply.
31
Warning and error messages