Discharging A Nicd/Nimh Battery - HPI Racing reactor 500 Manuel D'installation

NiMH DISCHARGE
1.0A CUT: 4.2V
DEC INC
BATT START
>3 Seconds
STOP ENTER
Battery Battery
Type Voltage
NiMH 1.0A 7.42V
DSC 22:45 00890
Elapsed
Discharge Discharged
Current Time Capacity
The discharge current is set on the left and the final voltage on the right.
The current value can range from 0.1-1.0A. The voltage range is 0.1-
25.0v. Press the START/ENTER for more than 3 seconds to start the
program.
This screen shows the real time discharging status. The user can press
START/ENTER key to alter the discharge current at any time and again
to store the value. Press BATT.TYPE/STOP key at any time to stop the
discharge process.
23

Discharging a NiCd/NiMH battery