Various Program Information Screens - HPI Racing reactor 500 Manuel D'installation

During the charging or discharging process the user can access various information about the
program settings. By pressing the "DEC" key the Reactor 500 will display the users settings in order.
By pressing the "INC" key a display of each cells voltage is shown.
End Voltage
12.6V(3S)
DEC
Capacity Cut-Off
ON 5000mAh
DEC
Safety Time
ON 120min
DEC
USB/Temp Select
Temp Cut-Off 80°C
DEC
Ext. Temp ----
DEC
IN Power Voltage
12.6V(3S)
4.07 4.06 0.00 V
0.00 0.00 0.00 V

Various program information screens

If the program has ended then the final voltage will be displayed
The capacity cut off settings are displayed
The safety timer settings are displayed
The temperature cut off settings are displayed
The temperature probe readings are shown when in use
The real time internal DC voltage is displayed
If the battery is connected via the balancing lead, then you can check the
voltage of each cell in the pack by pressing the "INC" key. Up to 6 cells
can be displayed.
29