Charging A Nicd/Nimh Battery - HPI Racing reactor 500 Manuel D'installation

Charging a NiCd/NiMH battery

NiMH CHARGE Aut
CURRENT 5.0A
DEC INC
BATT START
>3 Seconds
STOP ENTER
Battery Battery
Type Voltage
NiMH 2.0A 7.42V
CHG 22:45 00890
Charging Elapsed Charged
Current Time Capacity
Charging a NiCd/NiMH battery in charge mode
This program will charge the battery at the current the user sets manually. In the "AUTO" function
a upper limit should still be set, to avoid excessive feeding of current. Some batteries with low
resistance and capacity can lead to a high current charge in "AUTO". To change between "AUTO"
and "MANUAL" highlight the top line, then press and hold "INC" & "DEC" simultaneously to swap
between the two modes. NB: Allowable fast charge current: 1-2C
This program is for charging NiCd/MiMH batteries associated with R/C
applications. The user can press START/ENTER key to make the
selection blink and then "INC" or "DEC" to change the value. Press
START/ENTER again to store the value.
This screen shows the real time status during the charge process. Press
BATT.TYPE/STOP key once to stop the charge process.
22