Charge/Discharge Cycle Of A Nicd/Nimh Battery - HPI Racing reactor 500 Manuel D'installation

Charge/discharge cycle of a NiCd/NiMH battery

NiMH CYCLE
DCHG>CHG 1
DEC INC DEC INC
BATT START
>3 Seconds
STOP ENTER
Battery Battery
Type Voltage
NiMH 1.0A 7.42V
D>C 22:45 00890
Charge or Elapsed Charged or
Discharge Time Discharged
Current Capacity
DCHG 1 1314mAh
CHG 1 1430mAh
The type of sequence can be set on the left and the number of cycles in
the sequence can be set on the right (1-5)
This screen shows the real time status. The current can be altered by
pressing the START/ENTER key and again to confirm the new setting.
The BATT.TYPE/STOP will stop the process at any time.
When the process is reaching the end, you can press "INC or "DEC" to
see the results from each cycle
24