Storage Control Of A Lithium Battery - HPI Racing reactor 500 Manuel D'installation

Storage control of a Lithium battery

LiPo STORAGE
1.0A 11.1V(3S)
DEC INC DEC INC
BATT START
>3 Seconds
STOP ENTER
Number Battery
of cells Voltage
LP3S 1.0A 12.59V
STO 22:43 00682
Charging Elapsed Supplied
Current Time Capacity
Charging a Lithium battery in storage mode
The "STORAGE" function is for charging/discharging batteries which you wish to put away for use
later. This program is designed to bring a battery pack to a partially charged state suitable for
storage. The voltage level by type is: 3.75v Li-ion, 3.85v LiPo and 3.3v LiFe. The program will
automatically discharge the pack if the voltage exceeds the storage level of that type of battery
pack.
At this screen, the user can set up the current and voltage of the battery
pack to be stored. Charging and discharging will bring the battery to the
"STORAGE" voltage level
This screen shows the real time status during the charge process. Press
BATT.TYPE/STOP key once to stop the charge process.
20