Antari M-8 Mode D'emploi page 8

the range of 1 and 200 seconds.
Setting the output duration for timer operation
Press the button FUNCTION until the display indicates »Duration Set«. Use the buttons UP
and DOWN to adjust the duration of the fog outputs in timer mode within the range of 1 and
200 seconds.
Setting the fog output volume for timer operation
Press the button FUNCTION until the display indicates »Timer Out«. Use the buttons UP
and DOWN to choose the fog output volume (at High or Medium or Low) in timer mode.
Setting the fog output volume
Press the button FUNCTION until the display indicates »Volume Out«. Use the buttons UP
and DOWN to choose the fog output volume (at High or Medium or Low).
Setting the DMX512 address
Press the FUNCTION until the display indicates »DMX 512 Add.«. Use the buttons UP and
DOWN, to set the machine to the same address as on your DMX controller. Please refer to
chapter DMX512 settings for more information on DMX operation.
Switching the fluid sensor on and off
Press the button FUNCTION until the display indicates »Fluid Sensor On«. Use the buttons
UP and DOWN to deactivate the fluid sensor (indication »Fluid Sensor Off«) and to
reactivate it (indication »Fluid Sensor On«).
8