Antari M-8 Mode D'emploi page 14

M-8 Description
3.
1.
If you experience low output, pump noisily or no output at all, unplug immediately. Check
fluid level, the fuse, remote control connection and mains power. If all of the above appears
to be O.K., plug the unit and try again. If fog still cannot be produced, check the hose
attached to the tank to make sure there is fluid going through the hose. If you are unable to
determine the cause of the problem, do not continue pushing the buttons on controller, as
this may damage the unit. Return the machine to your Antari dealer.
2.
5.
4.
6.
8.
7.
11.
9.
13.
12.
3.
10.
14.
15.
14
M-8 Ma c hine La y out
(M-2 1 )