Antari M-8 Mode D'emploi page 4

-If moisture, water or fog liquid gets inside the machine, immediately unplug the unit and
wipe off and keep it dry.
-No user serviceable parts inside. Refer to your ANTARI dealer or other qualified Service
personnel.
Danger of Burns
-Structural modification inside the machine is not allowed at anytime, please do not attempt
to modify the machine by removing the cover, other wise burns may result.
-Never leave the unit running unattended.
-Never aim the output nozzle directly at people or animals.
-Fog machine output is very hot. Avoid coming within 60cm of the output nozzle during
operation.
-Locate the fog machine in a well-ventilated area. Never cover the unit's vents. In order to
guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides
and top of the unit.
-Never aim the output nozzle at open flames.
-The output nozzle becomes very hot during operation (200℃). Keep flammable materials at
least 50cm away from the nozzle.
-Always allow your ANTARI FOG MACHINE to cool down before attempting to clean or
service it & transporting.
Danger of explosion
Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.
․
Use only high-quality, water-based fog liquid that your dealer recommends. Other fog
․
liquids may cause clogging or damage to internal parts.
4