Setting The Time; Select The Temperature - Zanussi ZWF 1650 Notice D'utilisation

All indicators in the display will appear in this
language from now on.
Note:
If the undesired language has been set, select first a
washing programme and then press contemporary
Spin + Options buttons for about 3 seconds in order
to change the language.
Follow the instructions as before.

SETTING THE TIME

You should set the time prior to the first wash and
when changing to and from daylight savings time.
See «Clock setting», Menu.
5. Select the desired programme
Press the buttons Fabric and Special programmes
repeatedly to select the desired programme.
The relevant message will appear in the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric.
The Start/Pause button
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate
the END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
Cotton Mini 30
Economy Rinses
E
Drain
Synthetics
Delicates Spin
Memory 2
Handwash
Memory 1
Wool
light will start flashing.
Cotton 08.30
Cycle end at 10.55
95°C 1600
Options Change
Temp. Spin Cancel

6. Select the temperature

Press the Temp. button if you wish to select a
temperature value different from the one proposed
by the washing machine.
The message of the maximum available temperature
appears on the second row of the display for 5
seconds (instead of «cycle end at»). In the corner of
the third row appears the indication of the selected
temperature.
COTTON
MAX 95°C
40°C 1400
Temp. Spin Options Change
7. Select the Spin Speed "Spin", the
Rinse Hold
Press the Spin button repeatedly, in order to select
the desired spin speed or No Spin «O» or the Rinse
Hold or the Night Cycle
relevant message will appear on the second row of
the display for 5 seconds. The selected spin level will
be shown on the third row next to the spin button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme
with the water still in the tub.
COTTON
MAX 1600
40°C 1200
Temp. Spin Options Change
8. Select the desired options
Depress the relevant buttons to select the required
options. Depending on the selected programme only
certain options are available and shown during the
selection phase.
Note:
Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
98
08.30
10.55
Cancel
or Night cycle
options. The
08.30
10.55
Cancel