Setting A Programme - Zanussi ZWS76100WW Mode D'emploi

B
B
2 1
C
C
2 1
When you use the liquid detergent:
• Do not use gelatinous or thick liq-
uid detergents.
• Do not put more liquid detergent
than the edge of the detergent de-
vider.
• Do not set the prewash option.
• Do not set the delay start.
12
Insert the detergent divid-
er in position B.
The position B of the de-
tergent divider is for pow-
der detergent in the rear
compartment and for liq-
uid detergent/additive or
bleach in the front com-
partment.
To use only liquid de-
tergent:
Insert the detergent divid-
er in position C.
The position C of the de-
tergent divider is for liq-
uid detergent.
Close the detergent dis-
penser carefully.

SETTING A PROGRAMME

1. Turn the programme knob to switch the
appliance on and set the programme:
The indicator of the button Départ/Pause - Start/
Pause flashes.
2. If necessary, change the temperature and the
spin speed or add available options.
When you activate an option, the indicator of the
set option comes on.
If you set something incorrect, the
indicator of button Départ/Pause -
Start/Pause flashes red.
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press the button Départ/Pause - Start/Pause.
The corresponding indicator stops to flash.
The phase indicator
The programme starts and the door locks.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Départ différé - Delay Start
repeatedly to set the required delay.
The indicator of the set delay comes on.
2. Press the button Départ/Pause - Start/Pause:
• The door is locked.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the delay
setting before you press the button
Départ/Pause - Start/Pause. After
pressing the button Départ/Pause -
Start/Pause, you can only cancel the
delay.
To cancel the delay start:
a. Press the button Départ/Pause - Start/
Pause to set the appliance to pause.
The corresponding indicator flashes.
b. Press the button Départ différé - Delay
Start once; the indicator of the set delay
goes off.
Press the button Départ/Pause - Start/
Pause again to start the programme
immediately.
illuminates and stays on.