Setting A Programme - Zanussi ZWS77100SS Manuel D'utilisation

C
2 1
When you use the liquid detergent:
• Do not use gelatinous or thick liq-
uid detergents.
• Do not put more liquid detergent
than the edge of the detergent de-
vider.
• Do not set the prewash option.
• Do not set the delay start.

SETTING A PROGRAMME

1. Turn the programme knob to switch the
appliance on and set the programme:
• The indicator of the button Départ/Pause
- Start/Pause flashes.
• The display shows the programme duration.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press the button Départ/Pause - Start/Pause.
• The indicator of the button Départ/Pause -
Start/Pause stops to flash and stays on.
• The programme starts, the door locks, the
indicator
• The programme time decreases with steps
of one minute.
14
The position C of the de-
tergent divider is for liq-
uid detergent.
Close the detergent dis-
penser carefully.
is on.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START OPTION
1. Press the button Départ différé - Delay Start
again and again until the display shows the
delay you want to set. The delay start indicator
comes on.
2. Press the button Départ/Pause - Start/Pause:
• The door is locked and the indicator
on.
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the Départ différé - Delay Start option
before you press the button Départ/
Pause - Start/Pause. After pressing
the button Départ/Pause - Start/Pause
you can only cancel the Départ différé
- Delay Start option.
To cancel the Départ différé - Delay Start option:
a. Press the button Départ/Pause - Start/
Pause to set the appliance to pause. The
indicator of button Départ/Pause - Start/
Pause flashes.
b. Press the button Départ différé - Delay
Start until the display shows
Press the button Départ/Pause - Start/
Pause again to start the programme
immediately.
CANCELLING A RUNNING PROGRAMME
1. Turn the programme knob to position
cancel the programme and to deactivate the
appliance.
.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
is
.
to