Publicité
Les langues disponibles
Les langues disponibles
Gyro axis must be parallel to the main shaft
Fig. 1
Fig. 2
Installation
1°
Install the tail servo as described in the model's manual. For optimum performance the servo arm and tail
pushrod sould be perpendicular in the neutral position. Make sure no slop exists in the connection between
the arm and the servo arm.
Tail rotor setting
Fig. 4
N T- 3 1 0
GYRO
To connect the tail servo
To adjust the sensivity manually
Connect to the receiver (channel 4)
Main rotor turn
clockwise
Polarity
S
Connect to the receiver to adjust the gain
with your transmitter (channel 5)
90°
Tail servo
Fig. 3
Main rotor turn clockwise
(ZOOM 400)
PRO-301
Tail control pushrod
Publicité
