Possible Error Messages After Switch-On; No Hard Disk Installed; Hard Disk Not Formatted - Monacor AXR-104 Mode D'emploi

Parameter Aufnahme Suche Gerät
Allgemein
DATUM
Allgemein
Datumsformat
Zeitformat
DST
Sprache
NTP
Video Format
Nutzer
Anzeigezeit des Menüs
Info
Modus
Log
Show wizard
Fig. 6-4 Menu "System"
6) In the line "Sprache", select ENGLISCH.
7) Click the button "Sicherung" at the bottom of the menu.
8) The message "Speicherung erfolgreich" will appear. Click
"OK" to confirm the message.
9) Restart the recorder to display the menus in the language
selected and to start the "Startup Wizard":
a) Click "Schließung" at the top of the menu.
b) The window "Schließung" will appear. Click "Wieder
Starten": The recorder will be restarted and the menu
language will be English.
In the following text, all menus are shown in English.

6.2 Possible error messages after switch-on

According to the factory settings of the recorder, an alarm
signal will sound for 10 seconds when an error occurs.

6.2.1 No hard disk installed

×
Warning
1 No disk
Fig. 6-5 No hard disk installed
Additionally, the message
bottom of the screen. Please refer to page 37 (chapter 5.1)
for information on how to install a hard disk. First, shut down
the recorder properly:
×
1) Click to close the "Warning" window.
2) In the window "Startup Wizard", click "Cancel." The con-
firmation box "Are you sure you want to cancel Startup
Wizard?" will appear. Click "OK".
3) To show the toolbar (Fig. 6-2), press the right mouse but-
ton or move the mouse pointer to the centre of the lower
edge of the screen.
4) Click the symbol "Main Menu".
5) In the main menu, click the symbol
following information will appear:
Warning
Recording was stopped successfully, you can turn
off the power safely now !
Fig. 6-6 The recorder can now be safely switched off
6) Switch off the recorder with the rocker switch.
i
System Erweitert
02/15/2017 Zeit 11:04:56
30
MM/TT/JJ
24STD.
DEUTSCH
PAL
1MIN.
XVR
Default Sicherung ABBRUCH
NO HDD
will appear at the
"Shutdown". The

6.2.2 Hard disk not formatted

Warning
Schließung
1
Fig. 6-7 Hard disk unformatted
Additionally,
format the hard disk:
×
1) Click to close the window "Warning".
2) In the window "Startup Wizard", click " Next". The
following window will appear:
No. State
1 Unformat.
Overwrite Auto
Don't show this window next time.
Fig. 6-8 Window for the hard disk settings
The hard disk installed will be shown; the column "Free /
Total" will show the capacity available (here "0" because
the disk has not been formatted yet) and the total capacity.
3) Select the hard disk: In the column "Select", click the line
of the disk (see mouse pointer in Fig. 6-8).
4) Click the button "Format HDD". The window "Login"
will appear.
No. State
1 Unformat.
Overwrite Auto
Don't show this window next time.
Fig. 6-9 Window "Login"
5) Click "Login". The following confirmation window will
appear:
No. State
1 Unformat.
Overwrite Auto
Don't show this window next time.
Fig. 6-10 Window to confirm formatting
6) Click the button "OK". The status bar will indicate the
progress of the formatting process. When formatting has
been finished, the following message will appear:
No. State
1
Overwrite Auto
Don't show this window next time.
Fig. 6-11 Hard disk formatted
×
Unformat.
H
will appear at the bottom of the screen. To
HDD Management
Free/Total Free Time
0M/1863G 0s
Format HDD
×
Cancel Previous
HDD Management
Free/Total Free Time
0M/1863G 0s
Login
User I a dmin
Password
Login Cancel
Format HDD
×
Cancel Previous
HDD Management
Free/Total Free Time
0M/931G 0s
Notice
Entire Data Will Be Erased. Do You Want To
Continue?
OK Cancel
Format HDD
×
Cancel Previous
HDD Management
Free/Total Free Time
OK 922G/931G 920Hour
Notice
Format Completed
100%
OK
Format HDD
×
Cancel Previous
Select
Next
Select
Next
Select
Next
Select
Next
39