After Use - Monacor Security VTM-20 Mode D'emploi

6) To reset the menu adjustments, select the function
RESET and confirm with the button
This function deletes all adjustments made by
the user and replaces them by the factory settings.

5.2 After use

As the unit has a low current consumption even in the
feed-through operation, it is recommended to dis-
connect the power supply unit from the mains socket
after use.
6 Specifications
Video standards:. . PAL, NTSC
Resolutions
(pixels hor. x vert.): 1024 x 768
800 x 600
640 x 480
Picture frequencies: 60 Hz, 75 Hz
Video inputs: . . . . . phono, composite
mini DIN, S-video
D-SUB, 15-pole, VGA
Audio inputs: . . . . . phono, stereo
3.5 mm jack, stereo
Video output:. . . . . D-SUB, 15-pole, VGA
Audio output:. . . . . 3.5 mm jack, stereo
Ambient
temperature: . . . . . 0 – 40 °C
Power supply: . . . . 9 V , 600 mA via supplied
power supply unit connected to
230 V~/50 Hz/5 VA
Dimensions: . . . . . 170 x 30 x 110 mm
Weight: . . . . . . . . . 225 g
According to the manufacturer.
Subject to technical modification.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
/Source (1).
® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
GB
9