Remote Access Via A Computer - Monacor AXR-104 Mode D'emploi

9.2 Remote access via a computer

With the program extension "ActiveX", the computer can be
used for remote access to the recorder. The extension is stored
on the recorder; it can be installed on the computer via the
network (local network / Internet).
1) Make sure that the recorder is switched on and connected
to the network.
2) On the computer, open the web browser and enter both
the IP address and the web port of the recorder (see
recorder menu: Parameter  Network  Network), e. g.:
http://192.186.001.178:00080
When the computer is connected to the network,
"ActiveX" will be automatically downloaded and installed.
Note: If the download of "ActiveX" fails, check whether the security
settings of your browser or firewall are too high.
3) Once "ActiveX" has been installed, it is possible to enter
the IP address of the recorder in the web browser and to
access the recorder. First, a login window will appear:
User login
Username admin
Password
Client Port 9000
Bitrate Sub stream
Language English
Remember Pwd
Login
Fig. 9-5 Login for remote access
Menu item
Username
Password
Client Port
Bitrate
Language
Remember Pwd To save the password
Open All Chan-
nels Preview
Login
Reset
4) After login, the view for live surveillance will appear on
the monitor:
Live Playback Remote Setting
CH01
CH01
CH02
CH03
CH04
IP CH01
IP CH02
IP CH03
No Video
IP CH04
IP CH05
IP CH06
No Video
Fig. 9-6 Live surveillance from a computer
56
Open All Channels Preview
Reset
Function
User name (factory setting: admin)
Password (factory setting: no password)
Port number of the recorder; if required, see
 
menu Parameter Network
Data transmission (factory setting: "Main
stream" for Intranet, "Substream" for Internet)
The menu language is English.
To open all recorder channels
To establish a connection to the recorder
To delete all settings
Local Settings Logout
CH02 CH03 CH04
No Video No Video No Video
No Video
Menu item
Playback
Remote Setting Settings for the recorder
Local Setting
right side of the menu, PTZ control and image settings

Network
To call up a pop-up menu for mainstream / substream
selection, click a live image with the right mouse button.
0 1 2 3 4 5 6 7 8 9 10
ZOOM
FOCUS
IRIS
Preset 1
Cruise 1
125 130 132 100
Default
Function
Symbol
top of the menu, function area
Live Live surveillance
To replay recordings
To define paths for recordings on the computer
Logout Logout
left side of the menu, channel overview
To enable or disable the live image
To start or stop video recordings
on the computer
To save a snapshot on the computer
bottom of the menu, function symbols
To enable / disable all live images
To select the previous / next channel group
Full screen: To hide all control elements; use the
button ESC to show all control elements
Live images: original proportions / stretch to fill
the frame
To show / hide the live-view selection symbols
To pan, tilt,
arrows
to pan and tilt at the same time
To enable / disable
the automatic panorama pan function
Pan / Tilt speed
ZOOM Zoom function
FOCUS To adjust the focus
IRIS To adjust the iris
Preset To save the viewing direction of the camera
Cruise To start / stop the camera cruise
To adjust the hue
To adjust the brightness
To adjust the contrast
To adjust the colour saturation
Default To reset the image to its factory settings