Answer A Call When Redialling / Group Call Have Been Activated (Configurations Step 20 Active) - Telecom Behnke 20 Serie Instructions

7.3. Answer a call when redial-
ling / group call have been activated
(configurations step 20 active)
After lifting the receiver, press button
answer a call. Not doing so will result in the
connection being terminated automatically, as
the redialling function / the group call function
continue and the following number will be
dialled. You need a telephone with DTMF-dial-
ling (cf. configurations step 20 in the detailed
technical manual – www.behnke-online.de/
handbuch-analog).
The following commands are only available in
case multiple MLM have been connected:
Entry Function
*1 Activate MLM B
(In case MLM B is not connected, the integrated MLM will be activated.)
*2 / *4 Activate MLM A
(In case MLM A is not connected, the integrated MLM will be activated.)
*3 / *7 Activate MLM C
(In case MLM C is not connected, the integrated MLM will be activated.)
*5 Switch from MLM A to integrated MLM
1x ok beep
2x ok beep
www.behnke-online.com
Manual Door intercom devices a / b Series 20 / 30 / 50
to
integrated MLM activated
MLM-A activated
Extended Operation
GB
66