Publicité
Les langues disponibles
Les langues disponibles
INSTALLING THE LAPS SENSOR
Chain counter installation takes place in three steps: installation of the laps sensor on the windlass,
mounting of the chain counter and electrical connections.
Quick
windlasses
®
®
All Quick
windlasses come with a laps sensor suitable for use with chain counter CHC 1202 M.
Other windlasses
In order for the chain counter to measure the exact length of the chain, it has to count the number of
revolutions completed by the gear that drives the chain (gypsy). A laps sensor kit is supplied with the
chain counter. This kit includes a cylindrical magnet, a magnetic field sensor and two plastic adaptors to
be used to secure the sensor in place. The magnet is to be secured to the gypsy while the magnetic sen-
sor is to be fixed to the windlass base.
The standard installation procedure is described below. Unfortunately we cannot describe a procedure
applicable to all types of situation. Adapt this procedure to satisfy your own individual requirements.
EXAMPLES OF LAPS SENSOR INSTALLATION
vertical windlasses
horizontal windlasses
Max. 10 mm
Max. 10 mm
Ideal
installation
INSTALLATION
1
1
3
3
2
2
± 20¡
1
1
2
2
4
4
2
2
2
2
Maximum
removal
GB
1
MAGNET
2
SENSOR
3
ADAPTOR
4
ADAPTOR
5
Publicité
