Quick CHC1202 M Manuel De L'utilisateur page 27

CHECK EEPROM
CHECK EEPROM
TRUE: XXXX
SUM: YYYY
CAN MESSAGE
TX MSG: 000
RX MSG: 000
LAST ID: 000
CAN UPD: 000
CAN CONFIG
SET VALUE:
MASTER SLAVE
SETTING THE CHAIN COUNTER
SETTINGS MENU - UTILITY
CONTROL EEPROM (DATA MEMORY)
This function shows the calculated EEPROM memory checksum (SUM)
and the one stored (TRUE).
In order for the chain counter to operate properly the two values must
match.
Go back to UTILITY menu.
SETTINGS MENU - UTILITY
CAN MESSAGE
This function shows some information regarding CAN messages trans-
mission state.
Go back to UTILITY menu.
SETTINGS MENU
CAN CONFIGURATION
This option allows the user to determine chain counter»s priority in the
CAN network (see chapter MULTIPLE CHAIN COUNTERS).
MASTER and SLAVE can be entered (default: MASTER).
Select the values available.
Confirm entry and go back to SETTINGS menu.
GB
27