Quick CHC1202 M Manuel De L'utilisateur page 26

GB
SETTING THE CHAIN COUNTER
SW VERSION
SW VERSION
VX.X
SET DEFAULT
ARE YOU SURE?
YES NO
CHECK FLASH
CHECK FLASH
TRUE: XXXX
SUM: YYYY
26
SETTINGS MENU - UTILITY
SW VERSION
This function displays the software version installed in the chain counter.
Go back to UTILITY menu.
SETTINGS MENU - UTILITY
SET DEFAULT
This function allows the user to enter the default values and restart the
chain counter.
The SET DEFAULT window appears as shown below:
YES or NO can be entered.
Select data items from sub-menu.
Confirm value.
SETTINGS MENU - UTILITY
CHECK FLASH (PROGRAM MEMORY)
This function shows the calculated FLASH memory checksum (SUM)
and the one stored during production (TRUE).
In order for the chain counter to operate properly the two values must
match.
Go back to UTILITY menu.