Quick CHC1202 M Manuel De L'utilisateur page 21

LANGUAGE
ENGLISH
ITALIANO
FRANCAIS
DEUTSCH
ESPANOL
CALIBRATION
SET MEASURE
GYPSY LAP
MAGNETS NUMBER
FREE FALL
EXIT
SET MEASURE
SET VALUE:
METERS FEET
SETTING THE CHAIN COUNTER
SETTINGS MENU
LANGUAGE
Use this option to select the language in which the system messages
are displayed.
The LANGUAGE sub-menu appears as shown below.
Select the data items.
Confirm value and go back to SETTINGS menu.
SETTINGS MENU
CALIBRATION
Use this option to calibrate the chain counter according to the windlass
it is mounted on.
The CALIBRATION sub-menu appears as follows:
Select the data items in the menu.
Confirm value and go to next parameter; if EXIT has been selected the
system goes back to SETTINGS menu.
SETTINGS MENU - CALIBRATION
SET MEASURE
Use this option to select the unit of measurement relative to measure-
ment of chain lowered.
Selectable options: METERS or FEET. (default: METERS).
Select the values available.
Confirm value and go back to CALIBRATION menu.
GB
21