Publicité
Les langues disponibles
Les langues disponibles
GB
CHARACTERISTICS AND INSTALLATION
CHAIN COUNTER CHC 1202 M
Our vast experience in the world of sailing has allowed us to design and develop the chain counter CHC
1202 M whose performance is widely superior to those of similar instruments available on today»s market.
The chain counter CHC 1202 M allows the windlass to be activated to get the anchor aweigh or lower the
anchor providing the exact measure of the chain lowered.
Other important advantages which the chain counter offers, are:
• Simple user-friendly interface.
• Information displayed in 5 different languages.
• Automatic lowering function.
• Up alarm function.
• Locked keys function.
• Windlass management with auto free fall.
• Chain speed displayed.
• Supply voltage displayed.
• Equipped with clock/calendar.
• Depth of chain lowered shown in meters or feet.
• Graphic LCD display screen that can be easily read at various angles.
• Backlight display screen with 8 brightness levels.
• 8 different display contrast levels can be set.
• Automatic display contrast compensation according to environmental temperature.
• Universal power supply (12/24Vdc).
• Backlight illuminated function keys.
• CAN BUS interface for data transfer.
• Capable of operating in a wide range of ambient temperatures.
• Water-proof housing
• Can be installed behind the panel.
INSTALLATION
BEFORE ATTEMPTING TO USE THE CHAIN COUNTER CAREFULLY READ AND BECOME FAMILIAR
WITH THE CONTENTS OF THIS USER»S MANUAL. IF IN DOUBT, CONTACT YOUR NEAREST DEALER OR
®
QUICK
CUSTOMER SERVICE.
®
The Quick
chain counter has been designed and constructed solely for the tasks and purposes given
®
in this User»s manual. Quick
company shall not be held responsible for any direct or indirect property
damage caused by inappropriate use of the chain counter, incorrect installation or possible errors present
in this manual.
THE OPENING OF THE CHAIN COUNTER BY UNAUTHORIZED PERSONNEL MAKES THE
WARRANTY VOID.
THE PACKAGE CONTAINS: chain counter (and cover) - laps sensor kit - snap-on connector (to be used
for connection to output terminals) - 150 ohm terminator - gasket - stud bolts and nuts for mounting -
drilling templates - warranty card - this user»s manual.
4
Publicité
