Motion C5t Serie Manuel page 5

television reception, which can be determined by turning
the equipment off and on, you are encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
The following information is provided on the device or
devices covered in this document in compliance with FCC
regulations:
Motion Tablet PC model number: CFT-003
Company name: Motion Computing, Incorporated
8601 Ranch Road 2222, Bldg 2
Austin, TX 78730
Telephone: 512-637-1100
Fax: (512) 637-1199
Manufacturer name: Pegatron Corporation
No. 76, Ligong Street
Beitou, Taipei 112, Taiwan
Telephone: (886) 281439001
Fax: (886) 281437915
Intentional Emitter per FCC Part 15
Embedded in your Tablet PC are various Radio Frequency
(RF) wireless communication devices. It may contain one or
more radio-type devices such as the display digitizer that
operates in the 450–600 KHz band, an RFID radio that
operates in the 13.56 MHz band, as well as a Wi-Fi® device
that operates in the 2.4 or 5.4 GHz band in addition to
supporting Bluetooth® that operates in the 2.4 GHz band.
An optional 3G (WWAN) device can be configured into the
system that operates in the bands of 824.7–848.31 MHz as
well as 1851.25–1908.75 MHz dependent upon the 3G
network support in accordance to the operators locale. All
radio-type devices embedded in your Tablet PC have met
all the qualifications for use under FCC regulations and
guidelines.
This equipment complies with FCC Radio Frequency
Electromagnetic Signal (RF) exposure limits set forth for an
uncontrolled environment of portable transmission. This
product has been evaluated for RF exposure at a distance
of 0 cm. Operation at a separation distance of 0 cm or
greater from the radiating element to nearby persons will
not expose nearby persons to RF levels that exceed the FCC
rules for RF exposure.
Internal Bluetooth module notice
Class B Equipment: This equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
residential environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed
and used in accordance with the manufacturer's
instruction manual, may cause interference with radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning
CFT-003 Safety and Regulatory Guide
the equipment off and on, you are encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or a radio/television technician for
help.
This device complies with Part 15 of the Federal
Communications Commission (FCC) Rules. Operation is
subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
FCC CAUTION: Any changes or modification not expressly
approved by the party responsible for compliance could
void the user's authority to operate this equipment.
Operation of this wireless communication device is subject
to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
WARNING: Do not attempt to service the wireless
communication device built into the Tablet PC yourself.
Such action may void the warranty on the Tablet PC.
Contact your Motion Reseller or Motion Computing for
information about servicing your wireless communication
device.
FCC CAUTION: This device was tested for SAR (Specific
Absorption Rate) in a body-worn and portable
configuration. The device was found to comply with the
FCC requirements for RF exposure when used in the
docking station, held in the hand, or placed on the lap.
Maximum measured SAR levels for the Motion Tablet PCs
were:
Mode Frequency
802.11b 2.4 GHz
802.11a 5 GHz
GPRS 850 824.7–848.31 MHz
CDMA 850 824.7–848.31 MHz
WCDMA 850 824.7–848.31 MHz
GPRS 1900 1851.25–1908.75 MHz
CDMA 1900 1851.25–1908.75 MHz
WCDMA 1900 1851.25–1908.75 MHz
Any changes or modification not expressly approved by
the party responsible for compliance could void the user's
authority to operate this equipment.
Note: The Radio Frequency (RF) emitter installed in your
Tablet PC must not be located or operated in conjunction
with any other antenna or transmitter. 802.11 (WLAN) and
Value
(W/Kg)
0.185
0.262
0.222
0.386
0.378
0.438
1.470
1.490
5