Inspection And Service Schedules; Service Record; Warranty Inspection - Thermo King SLX-100 Mode D'emploi

CARE AND MAINTENANCE

INSPECTION AND SERVICE SCHEDULES

To ensure that your Thermo King unit operates reliably and economically over its full life, and to avoid limiting its warranty cover, the appropriate
inspection and service schedule must be followed. Inspection and Service intervals are determined by the number of unit operating hours and by the
age of the unit. Examples are shown in the table below. Your Dealer will prepare a schedule to suit your specific needs.
Operating hours per year

SERVICE RECORD

Each inspection and service performed should be recorded on the Service Record Sheet found at the back of this Manual

WARRANTY INSPECTION

Your Thermo King Dealer must inspect your unit, before the end of the first year of operation.This is so that your second year of warranty cover can be
activated. Your Dealer will arrange for this inspection to coincide with a scheduled inspection or service event. This is illustrated in the table above.
18
Inspection 6 months/ 500 hours
Inspection 12 months/ 1000 hours
(+ warranty Inspection)
Inspection 18 months/ 1500 hours
Full Service 24 months/ 2000 hours
(continue as above)
1000 2000
6 months/ 1000 hours
12 months/ 2000 hours
(+ warranty Inspection)
18 months/ 3000 hours
(continue as above)
3000
4 months/ 1000 hours
8 months/ 2000 hours
12 months/ 3000 hours
(+ warranty Inspection)
(continue as above)