Locking The Keypad; Navigating The Operator Menu - Thermo King SLX-100 Mode D'emploi

showing, press any soft key to return to the
Standard Display.
M
2. Press the soft key on the Standard
ENU
Display.
N
3. Press the soft key until the Sensors
EXT
Menu appears.
S
4. Press the soft key to enter the
ELECT
Sensors Menu.
B N
5. Press the or soft keys to scroll
ACK EXT
through the sensor screens. Only configured
and enabled sensors are shown. For example,
if the unit is configured as a two zone unit,
then Zone 3 sensors are not shown. If the
CargoWatch sensors are not enabled, they
will not be shown.
L
6. Press the soft key to display any
OCK
sensor screen for an indefinite period. Press
the key again to unlock the screen.
7. Press the E soft key to return to the
XIT
Standard Display. If no keys are pressed
within 30 seconds, the screen will return to
the Standard Display

LOCKING THE KEYPAD

Use the following steps to lock the keypad:
1. Press the MENU soft key from the Standard
Display.
2. Press NEXT and BACK soft keys to scroll to
the Mode menu.
3. Press the KEYPAD LOCKOUT soft key.
4. Confirm the keypad lockout by pressing
either the YES or NO soft key.
5. Pressing any key for 10 seconds will unlock
the keypad.

NAVIGATING THE OPERATOR MENU

The Operator Menu contains nine individual
menu areas that allow the operator to view
information and modify unit operation. Use the
following steps to access these menu areas:
1. Press the MENU soft key from the Standard
Display.
2. Press NEXT and BACK soft keys to scroll
up or down through the nine main menu
areas.
3. Press the SELECT soft key to access a
specific menu area when shown on the
display screen.
4. Press the EXIT soft key to return to the
Standard Display.
CONTROLLER DESCRIPTION
Operator Menu Choices
Immediate change of an
Language Reset
alternate language:
Soft Keys
1. Press the SET POINT soft key and the
MENU soft key on the Standard Display at
the same time for 5 second.
2. The "NEW LANGUAGE WILL BE" Screen
will appear.
3. Press the + or - soft keys to select the desired
language.
4. When the desired language is shown, press
the YES soft key to confirm the choice.
5. The "PROGRAMMING
LANGUAGE-PLEASE WAIT" Screen
briefly appears.
6. The "LANGUAGE SELECTED IS XXX"
Screen briefly appears.
7. Press the EXIT soft key to return to the
Standard Display.
BEA233
13