Environmental Protection; Repair Service; Spare Parts - PrimAster PMESH 1000 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
Problem
The hedge trimmer
does not run.
Not enough power,
not running
smoothly
If you are unable to rectify the problem, contact our service department (details
provided on the warranty card) or find a specialist workshop.

Environmental protection

Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
Potential causes
No electricity
House fuse or residualcurrent
circuit breaker has
been tripped.
The motor overload
protection has triggered
because the motor has
been overloaded or has
overheated.
The hedge shears have
been jammed by plant
remains or foreign objects
(e.g. a piece of wire).
Hedge shears are dull or
damaged.

Repair service

Repairs to electric power tools should only be carried out
by specialist electrical personel.

Spare parts

Please contact our service department if you need acces-
sories or spare parts.
points.
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to per-
sons or damage to the machine.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
GB-12
Solutions, tips
Check whether the hedge
trimmer is connected to mains
electricity.
Check the extension cord for
damage.
Let the hedge trimmer cool off
for 15–20 minutes.
Disconnect the hedge trimmer
from the mains first. Inspect the
hedge shears and remove any
foreign objects.
Have the hedge trimmer
checked by a specialist
workshop.

Publicité

Table des Matières
loading

Table des Matières