I
5.2 SOSTITUZIONE DEL FIANCO.
ATTENZIONE!
Eseguire questa operazione in due persone.
Per la sostituzione del fianco:
- Consultare il CAPITOLO 2.5.
5.3 SOSTITUZIONE DEL VETRO FRONTALE
ATTENZIONE!
Eseguire questa operazione in due persone.
Per la sostituzione del vetro frontale:
- Consultare il CAPITOLO 2.6.
5.4 SOSTITUZIONE DEL LED REGGIMENSOLA
Per la sostituzione del LED del reggimensola (Fig. 57;
Pos. 1):
- Fare leva con un cacciavite nel piccola tacca che si
trova vicino al LED.
- Estrarre il LED (Fig. 58, Pos. 1)
- Staccare l' innesto del LED e sostituire il faretto con
uno nuovo.
Fig. N°57
Abb. N°57
104
GB
5.2 REPLACING THE SIDE PANEL
To replace the side panel:
- Consult CHAPTER 2.5
5.3 REPLACING THE FRONT GLASS
To replace the front glass:
- Consult CHAPTER 2.6.
5.4 REPLACING THE SHELF HOLDER LED
To replace the shelf holder LED (Fig. 57; Pos. 1):
- Insert a screwdriver in the small slot near the LED.
- Using the screwdriver as a lever, remove the LED (Fig.
58, Pos. 1)
- Detach the LED connection and replace the light with
a new one.
1
ATTENTION!
Perform this operation with 2 people.
ATTENTION!
Perform this operation with 2 people.