Assembly / Installation; Safety Instructions; Installation; Pneumatic Installation - Burkert Type 2051 Manuel D'utilisation

Assembly/Installation
7. ASSEMBLY / INSTALLATION
7.1. Safety instructions
DANGER!
Danger - high pressure in the equipment!
• Before loosening the lines and valves, turn off the pressure and
vent the lines.
WARNING!
Risk of injury from improper assembly / installation!
• Installation may be carried out by authorised technicians only
and with the appropriate tools!
Risk of injury from unintentional activation of the system and
an uncontrolled restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
7.2.

Installation

During the installation, please observe the operating instruc-
tions of the respective fitting.
Type 2051
7.3. Pneumatic Installation
The rotary actuator can be installed in any position.
Before installation:
→
Make sure that the mechanical connection of the rotary actuator
neatly fits with the fitting to prevent friction.
→
Connect the pipes for the control air the connections provided for
this purpose on the rotary actuator.
english
13