Customizing This Unit (Manual Setup); Operating The Manual Setup Menu; Speaker Menu - Yamaha RX-V1900 Mode D'emploi

Customizing this unit (MANUAL SETUP)

The "MANUAL SETUP" menu allows you to manually adjust speaker and system parameters using the remote control.
For the complete menu structure, see "SET MENU tree" (page 114).
y
The initial factory settings are indicated in bold under each parameter.
Operating the MANUAL SETUP
menu
This section explains how to configure parameters in the
MANUAL SETUP menu using the OSD.
y
• To return to the previous menu level, press 9RETURN.
• Pressing JPARAMETER cancels the menu operation.
Set the operation mode selector to E AMP
1
and then press H MENU to enter "SET
MENU".
The top "SET MENU" screen appears in the OSD.
SET MENU
;AUTO SETUP
. ;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
[ ]/[ ]:
[ENTER]:
2
Press 8k / n to select "MANUAL SETUP"
and then press 8ENTER.
The "MANUAL SETUP" screen appears in the OSD.
MANUAL SETUP
.

1 SPEAKER MENU

2 VOLUME MENU
3 SOUND MENU
4 VIDEO MENU
5 INPUT MENU
6 OPTION MENU
[ ]/[ ]:
[ENTER]:
3
Press 8 k / n repeatedly and then press
8 ENTER to select and enter the desired
menu.
As an example, the following screen appears if
"SOUND MENU" is selected.
3 SOUND MENU
.
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)AUDIO SET
F)PURE DIRECT
[ ]/[ ]:
[ENTER]:
66
En
Up/Down
Enter
Up/Down
Enter
Up/Down
Enter
4
Press 8 k / n repeatedly and then press
8 ENTER to select and enter the desired
submenu.
As an example, the following screen appears if "LFE
LEVEL" is selected.
B)LFE LEVEL
. SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
[ ]/[ ]:
[p]/[[]:
5
Press 8 k / n to select the desired parameter
and then 8 l / h to change the parameter
settings.
• To increase the value, press 8 h.
• To decrease the value, press 8 l.
Press H MENU to exit from "SET MENU".
6
Up/Down
Adjust