Using Usb Features - Yamaha RX-V1900 Mode D'emploi

Before performing the following operations, set the operation
mode selector on the remote control to E SOURCE and then
press 3 USB.
Use this feature to enjoy WAV (PCM format only), MP3
and WMA files saved on your USB memory device or
USB portable audio player connected to the USB port on
the front panel of this unit.
Notes
• "Please wait" may appear whenever it takes time for
communication. This is not a system malfunction. Wait for a
while.
• This unit supports USB mass storage class devices (except USB
Hard Disc Drivers) using FAT 16 or FAT 32.
• Only the first partition is displayed in the OSD. You cannot
select files in other partitions.
• Up to 8 levels of directory hierarchy and 500 music files per
directory are recognized.
• Some devices may not work properly even if they meet the
requirements.
• Some WAV, MP3 and WMA files may not be playable or may
be noisy when played.
1
Connect a USB jack of a USB memory device
or USB portable audio player to the USB port
on the front panel of this unit.
INFO
S
USB
USB memory device or USB
portable audio player

Using USB features

Press J DISPLAY on the remote control.
2
The following display appears in the OSD.
3
Press 8 k / n to select the "USB BROWSE"
and then press 8 h.
4
Press 8k / n / l / h to navigate the USB
menu and then press 8ENTER to begin
playback of the selected item.
• Press 8k / n to select the desired menu.
• Press 8h to enter the selected menu.
• Press 8l to return to the previous menu level.
y
• ">" in the right corner of each menu line indicates that
there is a submenu available in the next menu level.
• You can configure the display settings with "DISPLAY
SET" (page 75).
■ Function of the play information display
[1]
[2]
[3]
[4]
[1] Name of the artist
[2] Name of the album
[3] Name of the song
[4] Elapsed time
[5] Shuffle and repeat icons
[6] (playback)
TOP MENU
USB BROWSE
PLAY STYLE
1 / 2
PLAY INFO
Frankie Zipper
Made-to-order
Road to India
0:51
>
>
[5]
[6]
All
55
En