Yamaha RX-V1900 Mode D'emploi page 80

Customizing this unit (MANUAL SETUP)
Short message display
SHORT MESSAGE
Use this feature to activate or deactivate the short message
display function.
Choice
ON Activates the short message display function.
The contents of the front panel display appear at
the bottom of the screen each time you operate
this unit.
OFF Deactivates the short message display function.
Note
The short message display does not appear in the following
cases:
– when the component video signals with 480p/576p, 720p,
1080i or 1080p resolutions are input
– when HDMI video signals are input
On-screen display time ON SCREEN
Use this feature to set the amount of time to display the
iPod menu or USB menu in the OSD after you perform a
certain operation.
Choice
ALWAYS Displays the OSD unceasingly during an
operation.
10S Turns off the OSD 10 seconds after you perform
a certain operation.
30S Turns off the OSD 30 seconds after you perform
a certain operation.
Front panel display scroll FL SCROLL
Use this feature to set the mode to display the iPod menu
or USB menu (such as song title) in the front panel
display.
Choice
CONT Select this to display the operation status in the
front panel display in a continuous manner.
ONCE Select this to display the operation status in the
front panel display by the first 14 alphanumeric
characters after scrolling all characters once.
76
En
Functions
Functions
Functions
■ Memory guard
Use this feature to prevent accidental changes to sound
field program parameter and other system settings.
Choice
OFF Turns off the memory guard feature.
ON Turns on the memory guard feature. While it is
turned on (
"SET MENU" screen), the following settings are
protected.
– sound field program parameters
– "AUTO SETUP" items
– all speaker levels
– "MANUAL SETUP" items
Note
You can change the following parameters even if "MEMORY
GUARD" is set to "ON":
– "DECODER MODE" in "INPUT MENU" (page 74)
– "MEMORY GUARD"
– "SUR." of the sound field program parameter (page 64)
– "TONE BYPASS" in "SOUND MENU" (page 72)
– Loading the system settings (page 79)
■ Initial configuration
Use this feature to select the settings of the audio input
jack select, active decoders and extended surround when
you turn on this unit.
Audio select AUDIO SELECT
Use this feature to designate the default audio input jack
select setting (page 35) for the input sources connected to
the DIGITAL INPUT jacks when you turn on the power of
this unit.
Choice
AUTO
Automatically detects the type of input signals
and selects the appropriate audio input jack
select setting.
LAST Automatically selects the last input jack select
setting used for the connected input source.
Decoder mode DECODER MODE
Use this feature to designate the default decoder mode
(page 74) for the input sources connected to the DIGITAL
INPUT jacks when you turn on the power of this unit.
Choice
AUTO Automatically detects the type of input signals
and select the appropriate decoder mode setting.
LAST Automatically selects the last decoder mode
setting used for the connected input source.
B)MEMORY GUARD
Functions
" "appears at the top right of the
G
C)INIT. CONFIG
Functions
Functions