Input Menu - Yamaha RX-V1900 Mode D'emploi

Notes
• The "COMPONENT I/P" parameter appears only when you set
"VIDEO CONV." to "ON".
• If your video monitor does not support analog video signals
with 480p/576p of resolution, the SET MENU items may not be
displayed on your video monitor when "COMPONENT I/P" is
set to "ON".
HDMI resolution HDMI RES.
Use this feature to activate or deactivate the HDMI up-
scaling of the analog video signals input at the VIDEO,
S VIDEO and COMPONENT VIDEO jacks so that the
up-scaled video signals are output at the HDMI OUT jack.
This unit up-scales the video signals as follows:
• 480i (NTSC)/576i (PAL) → 480p/576p, 1080i, 720p,
or 1080p
• 480p/576p → 1080i, 720p, or 1080p
Choice
THROUGH Does not up-scale any analog video signals.
480p (or 576p), Up-scales analog video signals to 480p or 576p,
1080i, 720p, or 1080p of resolution.
1080i, 720p,
1080p
Notes
• "HDMI RES." is available only when "VIDEO CONV." is set to
"ON".
• This unit automatically detects the video signal resolutions
supported by the connected video monitor and uses an asterisk
(*) to indicate them. If this unit cannot detect the resolutions,
set "MONITOR CHECK" to "SKIP" (page 94).
HDMI aspect ratio HDMI ASPECT
Use this feature to select the adjustment of aspect ratio for
analog video signals output at the HDMI OUT jack.
Choice
THRGH Does not make any adjustments to the aspect
ratio for the HDMI video signal sources.
16:9 Displays video images with the aspect ratio of
4:3 on your video monitor with the aspect ratio
of 16:9. Black stripes appear on the right and left
sides as a result.
SMART Fits video images with the aspect ratio of 4:3 to
your video monitor with the aspect ratio of 16:9.
Notes
• "HDMI ASPECT" is available only when "HDMI RES." is not
set to "THROUGH".
• If the aspect ratio of the input video source is other than 4:3, this
unit automatically ignores the setting of "HDMI ASPECT".
• When "HDMI ASPECT" is set to "SMART", the video images
of the edge of the video monitor are rather stretched.
Functions
Functions
Customizing this unit (MANUAL SETUP)

5 INPUT MENU

Use this menu to adjust the parameters of each input
source.
Input source
A)TUNER INPUT RENAME
VOL. TRIM
BGV
B)MULTI CH INPUT RENAME
VOL. TRIM
BGV
INPUT CH
FRONT
C)PHONO I/O ASSIGNMENT
D)CD INPUT RENAME
E)TV VOL. TRIM
F)MD/CD-R DECODER MODE
BGV
G)BD/HD DVD I/O ASSIGNMENT
H)DVD INPUT RENAME
I)CBL/SAT VOL. TRIM
J)DVR DECODER MODE
K)VCR
L)V-AUX
M)DOCK INPUT RENAME
VOL. TRIM
STANDBY CHARGE
N)BLUETOOTH INPUT RENAME
VOL. TRIM
BGV
START PAIRING
O)USB INPUT RENAME
VOL. TRIM
BGV
Parameter
73
En