ENG
5.
Operation
5.1
Switch-on and switch-off
NOTE: The luminaire is not equipped with a
switch of its own. The luminaire will switch
on when it is supplied with power.
6.
Replacing the lamp
NOTE: The lamp of this luminaire cannot be
replaced. When the lamp has reached the
end of its useful life, the entire luminaire
must be replaced.
24
7.
Retrofitting a safety glass
You can retrofit a safety glass to protect
the luminaire from below against environ-
mental effects.
NOTE: A suitable safety glass can be found
in the Waldmann range of accessories.
Fig. 13: Positioning the safety glass.
X Place the safety glass on the luminaire
from below, see Fig. 13.
Fig. 14: Fastening the safety glass.
X Fasten the safety glass to the luminaire
by folding all six holding clamps
upwards, see Fig. 14.
Operation